LX160
21.09.06
Page 6
3. Description of switches
Figure 1 Switches
ON/OFF:
Switches power on or off.
SC/VARIO/AUTO: (mode selector)
• SC is speed command mode
• VARIO mode
• AUTO mode
MC:
After MC switch is activated the upper number shows the MC. After
App. 1 second this disappears. With a short press MC
increase/decrease for 0.1, with a long press MC increase/decrease
for 0.5.
BUGS:
• upper position (2) 10% glide ratio
degradation (
default
)
• middle position (BUGS) 0% glide ratio
degradation (
default
)
• lower position (1) 5% glide ratio
degradation (
default
)
BALLAST:
• upper position is full ballast (2) +20% of min. load
(
default
)
• middle position is without ballast (BAL)
• lower position with half of ballast (1) +10% of min. load
(
default
)
To Next Page
Loading...
