LX160
21.09.06
Page 18
9.6. ScSp - (SPEED COMMAND Speed)
In this menu we can set the speed at which the LX160 will switch from VARIO to SC mode if
AUTO SC is enabled.
Figure 23 SC speed
9.7. Teco (total energy compensation)
If we have the LX160 set-up for pneumatic TE, (connected to a TE probe), TE compensation
is set to 0%. In case, that we have connected to static pressure, TE must be user selected
from 0% to 150%.
Figure 24 TE compensation
9.8. tabS (SC TAB)
SC mode with no audio information in area ±1.5
m
/
s
Figure 25 SC mode with no audio information
To Next Page
Loading...
