Need help?Do you have a question about the LXNAV Flarm Bat and is the answer not in the manual?
General| Power supply | 10-30V DC |
|---|---|
| FLARM transmitter | Yes |
| GPS receiver | Yes |
| Internal Antenna | Yes |
| Type | FLARM collision avoidance system |
Details product warranty for defects in materials or workmanship.
Covers battery charging, usage, and safety precautions.
Overview of FlarmBat features and collision avoidance capabilities.
Explains functions of LEDs and indicators on the FlarmBat display.
Describes the startup sequence and initial power-on display.
Details the procedure for powering on the FlarmBat device.
Explains how to properly shut down the FlarmBat device.
Describes normal usage, including volume control and near mode.
Explains how warning modes are activated and classified.
Details the functionality of the NEAREST mode for target detection.
Describes the visual indicators for obstacle warnings.
Guides on how to enter setup mode and adjust device settings.
Lists and explains various error codes displayed by the FlarmBat.
Provides information on connecting the FlarmBat to other devices.
Instructions for updating the FlarmBat firmware.
Guides on how to configure the FlarmBat settings.
Steps for configuring settings using the PowerFlarmConfig software.
Guide on configuring FlarmBat using the Flarm Tool software.
To Next Page
