53
OPERATORS MANUAL
Adjusting the ski pressure:
· On LFS-models the ski pressure can be changed by the spring
of shock absorber.
· The stiffness of spring can be changed by the tightening ring
on shock absorber (picture page 43). The tighter spring is
the greater ski pressure.
· The shock absorber have to remove for adjusting on LTS-
models. The adjust have to be done on predelivery service or
on regular maintenance. The stiffness of spring have to be
chosen by the principal use.
Adjusting the ski pressure by adjusting the slide rail
See: Slide rail system, adjusting the slide rail.
Tightening spring
Mjuk
SOFT
HARD
To Next Page
Loading...