Lynx RADIEN Trail Series User Manual

BASIC PROCEDURES
Shifting in Forward
1. Bring vehicle to a c om ple te stop.
2. Apply and hold brake.
60 0 EFI Engine
3. Tu rn the ignition key clockwise and release.
E-TEC Engi ne
4. Press and release the RER button.
All Engine s
5. RER pilot lamp will stop.
6. Apply throttle slowly an d evenly. Allow drive pulley to engage
then accelerate carefully.
Shutting Off the Engine
Release throttle lever and wait until engine has returned to idle
speed.
60 0 EFI Engine
Turn the ignition key counterclockwise in OFF position and pull off the
tether cord cap.
E-TEC Engi ne
Shut off the engine using either the emergency engine stop switch
or by pulling off the tether cord cap from the engine cut-off switch.
WARNING
Always remove the tether co rd cap from engine cu t-off switch
when vehicle is not in operation in order to prevent acciden-
tal engine starting or t o avoid unauthorized use by child ren or
others or theft.
_________________
137

Lynx RADIEN Trail Series Specifications

General

Brand	Lynx
Model	RADIEN Trail Series
Category	Offroad Vehicle
Language	English