TRACTION ENHANCING PRODUCTS
A00A8KA
12
TRACK SYMBOLS
1. Approved
2. NOT Approved
To ensure safe and proper installation , BRP recommends to have the
studs installed by your dealer.
– Use on ly the BRP approved special studs.
– Never use studs that exceed the height of yo ur snowmobile’s
track profile by more than 9.5 mm (3/8 in).
2
A33A32A
3
1
4
INSTALLATION OF STUDS
1. Stud size
2. Penetration range 6.4 mm to 9.5 mm (1/4 in to 3/8 in)
3. Track lug height
4. Track belt thickness
NOTE: All Radien models need to have stud protector installed on
front and rear parts of the radiator, if s tu ds are used.
____
SAFETY INFORMATION
___
43
To Next Page
Loading...
Need help?
General
