CONTROLS, INSTRUMENTS AND EQUIPMENT
WARNING
Make sure parking brake is fully diseng ag ed before operating
the snowmobile. When you ride the vehicle, brake pads that
are cau sed to drag by a continuous pressure on th e lever may
cause damage to the brake system and cause loss of braking
capacity and/or fire.
To Engage Parking Brake
Apply and hold brake, then lock brake lever using the parking brake
lever as shown.
mmo2009-005-006_a
TYPICAL — ENGAGE MECHANISM
Step 1: Apply and hold brake
Step 2: Lock brake lever using parking brake lever
To Release Parking Brake
Squeeze brake lever. Parking brake lever will automatically return to
its original position. Always release parking brake before riding.
__________________
69