Lynx RADIEN Trail Series User Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
520001897-001_a
TYPICAL - DRIVE BELT GUARD TOOLS LOCATION
1. Suspension adjustment tool
2. Pulley expander and headlight adjustment tool
Install in the following sequence:
CAUTION Make sure too ls are secured properly. Tools may
detach and cause damage to rotating parts.
1. Slide the suspension adjustment tool open end under retaining
tab.
520001663-022
SUSPENSION ADJUSTMENT TOOL
2. Press the closed end on the retaining tabs.
96
__________________

Lynx RADIEN Trail Series Specifications

General

Brand	Lynx
Model	RADIEN Trail Series
Category	Offroad Vehicle
Language	English