Lynx S-60 - PlaceholderHeading19; Diagnosing Cutting Quality Issues

Is the blade installed correctly and the blade
holder fastened securely?
Is the blade dull or
chipped?
Refer to the “Blade
Installation”.
Replace with a
new blade.
Is tool force set up properly?
Is the tool offset set
up properly?
Adjust the tool force
to obtain an optimum
blade force. Refer to 2.13
“CUTTING TEST”
Is there any
dirt adhered to
the blade?
Adjust the blade offset
to obtain an optimum
value.
Remove the blade
and blade holder
and clean them.
Please contact your
dealer for technician
support.
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
6.5 Cutting Quality Problems
6. Troubleshooting 6-5