EasyManua.ls Logo

MA lighting 2-Port Node - Important Safety Instructions

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Service: tech.support@malighting.com; +49.5251.688865-30 Emergency Line: +49.5251.688865-99 2-Port Node Version 1.1
2323
2323
23
Important safety instructions
1. Read all instructions of the user’s manual.
2. Keep the user’s manual for later use.
3. Observe all warnings and cautions on the device.
4. Before cleaning the device, disconnect the mains plug from the wall socket. Do not use any liquid or
spray cleaners. Use a damp cloth for cleaning.
5. Do not operate the device close to water.
6. Do not place the device on an unstable cart, pedestal or table. It could fall down and be heavily
damaged.
8. The device has to be provided with a grounding type plug. This means of protection has to be present
in any case.
9. Do not place objects on the power cord and let nobody step on the cable.
10. If using an extension cord, make sure that the sum of rated outputs of all devices on the cable does
not exceed the rated output of the extension cord.
11. Never spill liquid over the device ! Do not insert any objects through the housing vents into the
device, as they could contact live parts or cause shorted circuits. This can cause fire and electric
shocks.
12. You may only use power cords having a safety mark of conformity.
13. You may not operate any high-performance radio transceivers or alike in close proximity to the
device.
14. Do not service the device for yourself, as when opening and removing covers live parts are exposed
and, besides others, there is a risk to suffer from electric shocks. Let all service work be performed
by qualified customer service technicians.
15. If one of the following conditions occurs, pull the mains plug and call the customer service.
A. Power cord or plug are damaged or frayed.
B. Fluid was spilled over the device.
C. The device was exposed to rain (or wet conditions of other forms).
D. The device does not function properly when abiding by the instructions of use. Do only adjust
controls mentioned in the instructions, as an improper setting of other controls can cause
damage; very often, it takes quite some time for the customer service technician to repair
damages like these.
E. The device has dropped to the ground or the housing was damaged.

Related product manuals