68
turning on the air conditioner
Press the POWER button.
The RUN indicator of the indoor unit lights up.
SWING, AUTO, TIMER ON, TIMER OFF, CLOCK, SLEEP and TURBO op-
eration modes are explained in the following pages.
Notes:
• When changing modes during operation, sometimes the unit does
not response immediately. Wait 3 minutes.
• During HEATING mode (only on some models), air flow is not dis-
charged at the beginning. Wait 2— 5 minutes until the system
reaches the proper temperature.
• Wait at least 3 minutes before restarting the air conditioner.
airflow direction control (only on some models)
The vertical airflow (horizontal airflow) is automatically adjusted to
a certain angle in accordance with the operation mode after turning
on the unit.
COOLING, DRY
HEATING, FAN ONLY
Horizontal
Downward
Operation mode
Direction of airflow
SLEEP
TURBO
My
Temp
The direction of airflow can be also adjusted to your own require-
ments by pressing the pad on the remote control.
Important: HEATING mode is only available on heat pump models.
To Next Page
Loading...
Need help?
General
