20
MCSP40 by MacAllister
In more detail...
GB
IE
Product functions
Intended use
This petrol chain saw MCSP40 is designated with a maximum
power output of 1.5 kW. The product is intended for cutting logs with
a thickness of max. 370 mm with the guide bar provided. It must not
be used for cutting other materials, such as plastic, stone, metal or
wood that contains foreign objects.
The product may only be used with the guide bar/saw chain
combination stated in these instructions. It is not permitted to use
other types or sizes.
Vertical and horizontal cuts can be performed with this product.
Longitudinal sections can only be cut by professionals.
This product should not be used outside of domestic premises e.g.
for cutting rewood in forested areas.
The product should not be used on masonry and materials that are
harmful to health.
This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other
than those described.
Press the primer (9) when starting the product with a cold engine
(Fig. 20). Do not press the primer for warm starts.
9
Fig. 20
Primer
To Next Page
Loading...
