38
MCSP40 by MacAllister
In more detail...
GB
IE
Care and maintenance
Inspect the air lter (14) regularly. Replace it with a new one if
necessary.
Loosen the xing screw (12) and remove the air lter cover (13) >
(Figs. 53, 54).
Remove the air lter (14) (Fig. 55) and split it into its two >
halves.
Brush petrol into the mesh to remove the dirt. Reassemble the >
air lter (14), pressing on the rims until they ‘click’ together.
Attach the air lter cover (13) and secure it with the screw (12). >
12
13
14
Fig. 53 Fig. 54 Fig. 55
Air lter
Cylinder ns
Dust clogging between the
cylinder ns (16) will cause
overheating of the engine.
Periodically check and clean
the cylinder ns (16) (Fig. 56).
16
Fig. 56
To Next Page
Loading...
