Need help?Do you have a question about the MACAP LEO 55 and is the answer not in the manual?
General| Model | LEO 55 |
|---|---|
| Category | Coffee Grinder |
| Burr Type | Flat |
| Burr Size | 55 mm |
| Grinding Disc Diameter | 55 mm |
| Motor Power | 300 W |
| Hopper Capacity | 1.2 kg |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Weight | 8.5 kg |
| Dimensions (W x D x H) | 170 mm x 300 mm x 430 mm |
Explains safety symbols, warnings, and terminology used throughout the manual.
Provides essential details about the grinder, manufacturer contact, and liability.
Outlines the terms and conditions of the product warranty, including exclusions.
Lists critical safety precautions for the installation, operation, and maintenance of the coffee grinder.
Lists all components included in the coffee grinder package and checks required after unpacking.
Defines the proper commercial use of the grinder and manufacturer liability for misuse.
Details key technical data like voltages, power, dimensions, hopper capacity, and weight.
Identifies and labels the primary components of the coffee grinder with corresponding numbers.
States the measured noise level of the coffee grinder according to current regulations.
Instructions for correctly installing the coffee hopper and its cover, including cleaning steps.
Guidance on connecting the grinder to the electrical mains safely, checking voltage and earthing.
Steps to prepare the grinder and start its operation, including adding coffee beans and closing the hopper.
How to adjust the grind size for desired coffee fineness using the adjustment knob.
Procedure for setting the grinding time for single, double, or triple doses using the digital interface.
How to adjust the height of the filter holder support fork for optimal fit with the portafilter.
Specific operating steps for the LEO 55 model, including starting and stopping grinding.
Specific operating steps for the LEO 55 Essential model, including starting and stopping grinding.
Explains how to enter and navigate the programming menu for grinder functions.
Details the dose counter for tracking partial and total doses and how to reset it.
Steps to enable and configure the triple dose function for the grinder's dispensing.
How to activate and use the continuous grinding mode, including operational time limits.
Displays the software version used by the machine, relevant for service inquiries.
Lists common problems like device not starting or motor overheating and initial resolution steps.
Recommended preventive operations for periods of prolonged machine inactivity.
To Next Page
