47
LEO 55 - LEO 55 essential
Remove any residual coee and render the
machine non operational by cutting the pow-
er cable. Do not release the machine in the
environment.
Check that machine dispos-
al is performed with respect
of environmental rules and
according to the regulations
in force.
Information to the users.
Under Legislative Decree 25 September 2007,
no. 185 and art. 13, Legislative Decree 25 July
2005, no. 151 “Implementation of Directives
2002/95/EC, 2002/96/EC and 2003/108/EC,
regarding the reduction of use of hazardous
substances in electrical and electronic equip
-
ment as well as waste disposal”.
MACCHINA
IN
MANUTENZIONE
VIETATO
L’ACCESSO
oltre questo limite
ATTENZIONE
ORGANI
IN MOVIMENTO
ATTENZIONE
CORRENTE
ELETTRICA
MANUTENZIONE ORDINARIA
OLIARE INGRASSARE
TUTTE LE PARTI IN MOVIMENTO
OGNI 30 GG
9 DISPOSAL
The barred waste bin symbol on the equipment
means that the product, at the end of its service
life, must be disposed of separately from the
other types of waste.
The user must therefore transport the equip
-
ment, at the end of its service life, to the appro-
priate separate collection centres for electronic/
electro-technical waste products or return it to
the dealer when purchasing a new equivalent
equipment.
The appropriate separate collection
and followed by sending of the
used equipment to recycling, treat
-
ment and eco-friendly disposal will
help avoid negative eects on the
environment as well as on health
along with an easier recycling of the
materials forming the equipment.
10 MANUFACTURER
8.2 Inactivity
For prolonged machine inactivity, it is required
to carry out certain preventive operations:
■ disconnect the machine electrically.
■ empty the coee hopper.
■ clean all the parts in contact with food-
stus.
■ clean all the surfaces of the machine
with a cloth.
■ protect the outside with a cellophane lm
or bag.
■ store in dry sheltered rooms with tempera-
tures no lower than 1°C.
Macap s.r.l.
via Toniolo, 18
30030 - Maerne di Martellago (VE) - ITALY
www.macap.it
EN