How to improve hesitation in flow of bulky crop with MacDon D50?
To improve hesitation in the flow of bulky crop, consider these adjustments: increase the header angle, increase side draper speed, install an upper cross auger, or add flighting extensions.
How to stop excessive bouncing at normal field speed with MacDon D50 Farm Equipment?
To stop excessive bouncing at normal field speed, adjust the header float.
How to eliminate a hollow in the center when using MacDon D50?
To eliminate a hollow in the center, increase draper speed or decrease delivery opening width.
What to do if plastic fingers are bent rearward at the tip on MacDon D50?
If plastic fingers are bent rearward at the tip, raise the header, decrease header tilt, or move the reel aft.
What to do if plastic fingers are bent forward at the tip on MacDon D50 Farm Equipment?
If plastic fingers are bent forward at the tip, raise the header, decrease header tilt, or move the reel aft.
How to prevent the divider rod from running down standing crop on MacDon D50?
To prevent the divider rod from running down standing crop, remove the divider rods.
How to troubleshoot insufficient header lift on MacDon Farm Equipment?
If there is insufficient header lift, increase the relief pressure.
What to do when cutting tough crops with a standard torque (19-tooth) reel drive sprocket on MacDon D50?
When cutting tough crops with a standard torque (19-tooth) reel drive sprocket, replace it with a high torque (10-tooth) or 14-tooth reel drive sprocket.
How to stop material from wrapping at the upper cross auger beater bars on MacDon D50?
To prevent material from wrapping at the upper cross auger beater bars, remove the beater bars.
What to do if crop is thrown across the opening and under the opposite side draper on MacDon D50?
If crop is thrown across the opening and under the opposite side draper, trim the deflector or replace it with a narrow deflector (MD #172381).
General| Brand | MacDon |
|---|---|
| Model | D50 |
| Category | Farm Equipment |
| Language | English |
To Next Page
