PRE-DELIVERY INSPECTION
Form 169007 44 Revision D
REEL SHAFT RH BEARING (1 PLC)
REEL SHAFT LH BEARING (1 PLC)
High Temperature Extreme Pressure
(EP2) Performance With 1% Max
Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
D50
NOTE
To prevent binding and/or excessive
wear caused by sickle pressing on
guards, do not
over-grease. If more
than 6 to 8 pumps of the grease gun
are required to fill the cavity, replace
the seal in the sickle head.
SICKLE HEAD (1 PLC)
To Next Page
Loading...
