MacDon M1240 - Removing an IQAN G11 Bluetooth; Module

147867 44 Revision J
3.7 Removing an IQAN G11 Bluetooth
®®
Module
The IQAN G11 Bluetooth
®
Module should be removed after any software or firmware updates.
1016005
A
B
Figure 3.71: Relay Module Cover in Cab Headliner
1. Locate relay module access door (A) inside the cab, in the
front left corner of the headliner.
2. Turn latch (B) to open.
3. Open relay module access door (A).
1018745
A
Figure 3.72: Relay Module and Harness Connector
4. Remove IQAN G11 Bluetooth
®
Module (A) from roof
harness connector P826.
1016005
A
B
Figure 3.73: Relay Module Cover in Cab Headliner
5. Close relay module access door (A) and turn latch (B)
to lock.
INSTALLATION INSTRUCTIONS