MacDon M155 - Page 4

166590
MD KIT ENGLISH
PART NO DESCRIPTION QTY
136632 NUT - HEX L9 5/8-18-L9-ZP 16
136633 WASHER - FLAT HARDENED 5/8 IN. NOMINAL (L9) 16
169847 INSTRUCTION - SPM D61 SB1361 WHEEL NUTS & WASHERS 1
169570 INSTRUCTION - QUICK CARD M105 1
169565
INSTRUCTION - QUICK CARD M155 1
169475 INSTRUCTION - QUICK CARD M205 1
166575 DECAL - BOLT TORQUE 1
166584 DECAL - BOLT TORQUE 4
166454 DECAL - READ MANUAL 4
Inserting Supplemental Pages Into Customer’s Existing Manuals
Remove printed package from shrink wrap.
The package has information for M105, M155 and M205.
Depending on which unit you are working on, pull the appropriate model-specific information from
the package and discard the rest.
The information consists of:
- Pages destined for the Op Manual
- Pages destined for the Parts Catalog
Insert the new pages into the existing Op Manual and Parts Catalog.
Trim page to fit book and tape or glue over existing page.
NOTE: At the beginning of each section is a page reference table to help find the appropriate
section in the books for the new pages.
Quick Card
Each Model Windrower has a specific Quick Card for it. Leave the appropriate model Quick Card
in the cab for quick reference. Discard Quick Card that does not apply to the unit you are
updating.
NOTE: This form contains pages intended to be cut out and inserted into
customers existing manuals as noted above.
Revision A Pa
g
e 4 of 4
Form 169