Mack E-TECH SB-210-034 - Page 340

Page 324
SPECIFICATIONS
TORQUE SPECIFICATIONS FOR ENGINE-MOUNTED SENSORS
E-TECH™ ENGINE-MOUNTED SENSORS
Overtorquing a sensor or sensor mounting screw
can result in sensor breakage or thread damage.
Description Sensor and Sensor Mounting Hardware Sensor Threads Mounting Torque
V-MAC III Engine Speed
Sensor
64MT348M sensor and 505GC28 P15 and
P30 shims, as required. Sensor is retained
by one 66AM3 capscrew with M6 x 1.0
metric threads.
None 7 lb-ft (10 N•m)
V-MAC III Fuel
Temperature Sensor
64MT2103 sensor only 3/8-inch NPT English
pipe threads
23 lb-ft (31 N•m)
V-MAC III Oil Pressure
Sensor
64MT2114 sensor only 1/8-inch NPT English
pipe threads
12 lb-ft (16 N•m)
V-MAC III Boost Air
Temperature Sensor
64MT2102 sensor only (no washer
required; replaces sensor P/N 64MT2111M
sensor and washer P/N 57AM5)
1/2-inch NPT English
pipe threads
23 lb-ft (31 N•m)
V-MAC III Boost
Pressure Sensor
(Optional and Electronic
Dash)
46MT2101 1/4-inch NPT 18 lb-ft (24 N•m)
Ambient Air Temperature
Sensor (Mounted on
front of chassis)
64MT2118M 1/2-inch NPT English
pipe threads
23 lb-ft (31 N•m)
Dash Gauge Coolant
Temperature Sensor
64MT2112M sensor only 1/2-inch NPT English
pipe threads
23 lb-ft (31 N•m)
V-MAC III Coolant
Temperature Sensor
64MT2103 sensor only 3/8-inch NPT English
pipe threads
23 lb-ft (31 N•m)
V-MAC III Engine
Position Sensor
64MT348M sensor and 505GC28 P15 and
P30 shims, as required. Sensor is retained
by one 66AM3 capscrew with M6 x 1.0
metric threads.
None 7 lb-ft (10 N•m)
Dash Gauge Oil
Temperature Sensor
(Standard Dash)
Non-Current
64MT2112M (Sensor mounts in oil pan) 1/2-inch NPT English
pipe threads
23 lb-ft (31 N•m)
Dash Gauge Oil
Temperature Sensor
(Electronic Dash)
Non-Current
64MT2113M (Sensor mounts in oil pan) 1/2-inch NPT English
pipe threads
23 lb-ft (31 N•m)
Dash Gauge Oil
Temperature Sensor
(Standard Dash)
Current Production
64T2116 (Sensor mounts in oil filter
pedestal)
3/8-inch NPT English
pipe threads
20 lb-ft (27 N•m)
Dash Gauge Oil
Temperature Sensor
(Electronic Dash)
Current Production
64MT2103 (Sensor mounts in oil filter
pedestal)
3/8-inch NPT English
pipe threads
20 lb-ft (27 N•m)
5_106_00.bk Page 324 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs
https://barringtondieselclub.co.za/