Mack E-TECH SB-210-034 - Page 339

SPECIFICATIONS
Page 323
TORQUE SPECIFICATIONS FOR HOSE CLAMPS
HOSE CLAMPS (SEE “NOTE 6 — HOSE CLAMP INSTALLATION POSITIONING INFORMATION” ON PAGE 328)
TORQUE SPECIFICATIONS FOR PIPE PLUGS
PIPE PLUGS (SEE “NOTE 7 — PIPE PLUG SEALING” ON PAGE 328)
Fastener Name
Torque
Lb-In N•m
For Standard SAE J536 Type F Hose Clamps
Air Inlet Systems 38 4
Oil Drain Systems 28 3
Water or Coolant Systems 28 3
Hi-Torque Heavy-Duty Worm Clamp 80 9
T-Bolt Type Hose Clamp 50 6
Pipe Plug Size
Torque
Lb-Ft N•m
1/8 NPT 68
1/4 NPT 18 24
3/8 NPT 23 31
1/2 NPT 23 31
3/4 NPT — Cylinder Head
3/4 NPT — Other
55
35–65
68
48–88
1 NPT 43 58
1-1/4 NPT 75 101
5_106_00.bk Page 323 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs
https://barringtondieselclub.co.za/