Page 322
SPECIFICATIONS
Timing Cover to Cyl. Block Screw 40 55
TURBO AND EXHAUST MANIFOLD
Turbo to Exhaust Manifold Stud Nut 40 55
Turbo Oil Inlet Tube to Turbo Screw 15 20
Turbo Oil Drain Tube to Turbo Screw 15 20
Exh. Mfld. to Cyl. Head Stud (Install with Loctite
®
272. See “NOTE 4 —
EXHAUST MANIFOLD TORQUING” on page 328.)
20 (Dry) 27 (Dry)
Exh. Mfld. to Cyl. Head Stud Nut (12 mm Full Threaded Stud, See
“NOTE 4 — EXHAUST MANIFOLD TORQUING” on page 328)
80 109
Oil Fill/Turbo Drain to Block Screw 40 55
VALVE ROCKER ARM
Valve Rocker Arm Bracket to Cylinder Head Screw 40 55
Valve Rocker Arm Adjusting Screw Jam Nut 40 55
Valve Yoke Adjusting Screw Jam Nut (See “NOTE 5 — VALVE YOKE
SETTING” on page 328.)
33 45
Valve Rocker Arm Shaft Locating Screw 23 31
WATER MANIFOLD AND WATER PUMP
Water Pump Shaft Locknut 80 108
Water Manifold to Cylinder Head Screw 33 44
Water Pump Housing to Cylinder Block Screw 60 81
Water Pump Cover to Water Pump Hsg. Screw 15 20
MISCELLANEOUS
Alternator Mtg. Stud Nut 70 95
Coolant Conditioner Adapter/Thermostat Housing Mounting Screw 15 20
Heat Shield-to-Cylinder Block Mounting Studs 15 20
Heat Shield Mounting Nuts 15 20
Heat Shield Standoff Studs 18 24
Hydraulic Steering Pump to Engine Front Cover Stud Nut 40 55
Idler Gear Hub to Cyl. Block Screw 70 95
Oil Dipstick Guide Tube Compression Nut 24 33
Fastener Name
Torque
Lb-Ft N•m
5_106_00.bk Page 322 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs
https://barringtondieselclub.co.za/
To Next Page
Loading...
