Mackie d.4 Pro - Booth Level; Booth Stereo;Mono; Zone Level; Main Level

19
Owner’s Manual
Owner’s Manual
52. BOOTH LEVEL
This knob adjusts the output level at the booth out-
puts [10].
53. BOOTH STEREO/MONO
With this switch up, the booth [10] outputs provide a
stereo left and right output of the main mix.
If you only have one booth monitor, push the switch in
to combine the left and right signals to mono.
54. ZONE LEVEL
Thisknobadjuststheoutputlevelatthezone[11]
outputs.
55. MAIN LEVEL
This knob adjusts the main mix output level at the
mainoutXLRs[12].
It also adjusts the RCA main outs [14] but only when
the live/record [15] switch is out.
This control does not affect the main meters [57], or
thephones[51],booth[10],orzone[11]outputs,or
the FireWire outputs.
56. PAN
This knob adjusts the stereo balance of the main mix
atthemainoutXLRs[12].
It also adjusts the RCA main outs [14] but only when
the live/record [15] switch is out.
This control does not affect the main meters [57], or
thephones[51],booth[10],orzone[11]outputs,or
FireWire outputs.
57. MAIN LEVEL METERS
These meters indicate the signal strength of the main
mix outputs before the main level or pan controls.
Youwanttoseethesignalsbouncingbetweenthe“0”
andthe“+6”LEDs.ItisokayiftheOLLEDsatthetop
light occasionally, but if they light frequently or continu-
ously,turndowntheprogramfaders[38]untilthey
blink occasionally, or not at all.
DJ STAR
Press this imaginary button to link up directly to tech
support telepathically through your headphones.
TAKE A BREAK
It’s time for a nice cup of tea and a cheese sandwich.
You deserve it, as not many people read owner’s manuals
past page 3.
The next few pages contain the following Appendices:
Appendix A shows service and repair information.
Appendix B is a section on audio connectors.
Appendix C shows the specs and a block diagram.
Appendix D shows how to replace the crossfader.
Appendix E shows FireWire details.