Part No. SW1177 Rev. A 06/16
©2016 LOUD Technologies Inc. All Rights Reserved.
3
Owner’s Manual
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS ...............................................2
INTRODUCTION ...............................................................................4
QUICK START ...........................................................................5
HOOKUP DIAGRAMS...............................................................6
REAR PANEL DESCRIPTION .............................................................7
1. POWER CONNECTOR .......................................................7
2. POWER SWITCH ..............................................................7
3. AC SELECT SWITCH ........................................................... 7
4. SIGNAL INPUTS ................................................................ 7
5. INPUT SENSITIVITY ..........................................................8
6. ACOUSTIC SPACE..............................................................8
7. LOW FREQUENCY FILTER ..................................................8
8. HIGH FREQUENCY FILTER .................................................8
9. POWER MODE .................................................................9
10. CUSTOM-TUNED REAR PORT .........................................9
FRONT PANEL DESCRIPTION ............................................................ 9
11. POWER/OVERLOAD LED ..............................................9
PROTECTION CIRCUITS ..................................................................10
OVEREXCURSION PROTECTION .........................................10
THERMAL PROTECTION ......................................................10
INTEGRATED MAGNETIC SHIELDING ...................................10
OVERLOAD PROTECTION ...................................................10
INPUT SIGNAL WIRING ......................................................10
CARE AND CLEANING ....................................................................10
APPENDIX A: SERVICE INFO ..........................................................11
TROUBLESHOOTING ...........................................................11
REPAIR ...............................................................................12
APPENDIX B: TECHNICAL INFORMATION .......................................13
XR SERIES SPECIFICATIONS ...................................................13
XR SERIES DIMENSIONS ........................................................14
XR SERIES LIMITED WARRANTY ....................................................15
Contents XR Series Features
•
Professional level performance
•
Logarithmic waveguide provides acoustic
alignment for balanced sound across the entire
frequency spectrum
•
ELP™ Bass Refl ex System engineered for zero
turbulence, providing greatly increased output
capability and extended low-frequency response
•
1” black anodized aluminum tweeter reveals the
fi nest details and upper harmonics of your mix.
•
6.5" (XR624) or 8" (XR824) Kevlar® woofer
offers fast transient recovery for incredibly
accurate low frequency response
•
160W bi-amplifi ed Class-D amplifi cation
(100LF / 60HF)
•
Frequency response: 45Hz – 22kHz (XR624)
or 36Hz – 22kHz (XR824)
• Optimize XR monitors for your sound and mixing
environment
•
Adjustable acoustic space fi lters maintain fl at
response in typical placement
•
HF fi lter applies boost or cut to compensate for
particularly dull or bright sounding rooms
•
LF fi lter rolls off the low end to simulate smaller
speakers for reference
• Attention to the detail
•
Eco-friendly auto turn-off / turn-on
•
Black wood grain fi nish for a classic studio feel
•
Specially designed internal bracing adds stiffness
for reduced distortion and enhanced clarity
•
Included custom acoustic isolation pad reduces
unwanted resonance and improves bass response
Like us
Follow us
Watch our dang videos
Please write your serial number here for future
reference (i.e., insurance claims, tech support,
return authorization, make dad proud, etc.)
Purchased at:
Date of purchase: