© 2018 MacroAir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 26
Rev. Date 040218
Ensure the
fan is level
Do not bend rubber bootDo not bend rubber boot
WARNING: Do not put too much tension on the safety cable. This will
deform the rubber boot and hinder the proper cooling of the motor.
1.3 All Universal Mounts
Motor Unit
Universal Mount I-Beam safety cable starts on page 27
Universal Mount Glulam safety cable starts on page 28
Universal Mount Unistrut safety cable starts on page 29
To Next Page
Loading...
