© 2018 MacroAir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 35
Rev. Date 040218
This method is used to span components of a
building structure. Attachment points to the
building structure can vary greatly, so we
recommend contacting Unistrut so they can
recommend the best method for attaching the
Unistrut (www.unistrut.us).
If the spanning distance is greater than 8 feet,
please consult a Structural Engineer. Please refer
to page 4 for the maximum torque and weight
values.
2.1.3 Rapid Mount Industrial
Unistrut
NOTE: Mounting to C- and Z-purlins requires Unistrut span
mounting. Mounting to trusses under three (3) inches in width
requires two or more trusses to be linked with Unistrut.
To Next Page
Loading...
Need help?
General
