WiFi
MAG-ic Probe WiFi Options
MAG-ic Probe WiFi has many options for displaying the measurements being made.
The primary design of MAG-ic Probe has always been to connect to a computer and use the
MAG-ic Probe Software to save all your measurements and measuring locations to a picture or
drawing of your instrument. This allows you to Save and Print the picture with measurements for
archiving or comparison to other instruments.
MAG-ic Probe connected to a computer
running the MAG-ic Probe Software
USB Battery
MAG-ic Probe WiFi
MAG-ic Probe Display
Smartphone or tablet
2
However, sometimes you may not need to save the measurements - maybe you just want to take
progressive measurements as you are sanding or forming a plate or maybe you are on the road
taking some sample measurements of that special instrument you want to duplicate. Or maybe you
are just “old school” and want to document everything manually.
In all of these cases, you simply need a display to show you the measurements in real-time. MAG-ic
Probe can use WiFi technology to provide those measurements on your phone or tablet or if you
favor the extremely simple solution then our new MAG-ic Probe Display unit will interest you.
See the MAG-ic Probe Display unit at www.magicprobe.net
To Next Page
Loading...
Need help?
General