MAG-LEV audio ML1 - Page 10

7. 8. 9. 9.
REMOVE THE CIRCULAR STYROFOAM
PART FROM THE UPPER HALF OF THE
STYROFOAM BOX.
REMOVE THE PLASTIC BAG FROM THE
LEVITATING PLATTER.
HAVE A STRONG GRIP ON THE
PLATTER, DUE TO THE STRONG
FORCE AND PULL OF THE MAGNETS
IN THE TURNTABLE BODY AND THE
LEVITATING PLATTER.
Hold the levitating platter with both hands and
grip rmly.
Firmly gripping the platter, start lowering the
platter on the platter feet, slowly and vertically.
Place the channel on the bottom of the platter
onto all four platter feet, carefully and patiently.
Make sure that the platter feet are fully in the
channel and you feel no force of the magnets,
then let go of the platter.
You can help make sure all 4 feet are in the
channel by rotating the platter around its axis.
If all 4 platter feet are not in the channel, you
won`t be able to turn the platter with ease and
you will feel a force of the magnets pulling the
platter toward the body.
If the platter is not properly set up, the
platter will fall down due to strong magnets!
In this case there is risk of bodily injuries
and damages to the turntable.
BE CAREFUL EXECUTING THIS
STEP. THERE IS RISK OF BODILY
INJURY.
WARNING WARNING
WARNING
WARNING
MAKE SURE YOU
PLACE IT ON ALL
4 PLATTER FEET.
19