Magellan 300 - Formatting SD Card (Magellan Triton 400 and 500 Only); Displaying Information about the Triton Receiver; Restoring Factory Settings; Testing the Receiver

View Menu 24
3. Select Clear Memory.
4. Confirm. (Use this option with caution.)
Restoring Factory Settings
1. Access the Main Menu and select “View”.
2. Select Settings.
3. Select Restore Factory Settings.
4. Confirm. (Use this option with caution.)
Formatting SD Card (Magellan Triton 400 and 500 only)
1. Access the Main Menu and select “View”.
2. Select Settings.
3. Install SD card to be formatted.
4. Select Memory.
5. Select Format SD Card. (Option appears only when an SD card is inserted.)
6. Confirm. (This will erase all information on the SD card.)
About
Displaying Information About the Triton Receiver
1. Access the Main Menu and select “View”.
2. Select Settings.
3. Select About.
4. Select Version, Copyright, or Owner.
Version displays information about the firmware version, application versions and map
versions.
Copyright displays copyright information for the Magellan Triton.
Owner displays information about the owner of the Magellan Triton. You can select any of the
fields available to enter your details if desired.
Diagnostics
Testing the receiver
1. Access the Main Menu and select “View”.
2. Select Settings
3. Select Diagnostics.
4. Select Audio Test, Video Test, or Keypad Test.