Track Logs
55
Clearing the Active Track
The active track can get to be very large, especially if you haven’t cleared it in a while. It is
recommended that if you plan to use BackTrack or to save the upcoming track log you should
clear the active track before beginning your journey. If you do not, the other functions will
still work, but you will probably have a lot more track log information than you want.
1. Press MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight Active Track.
5. Press MENU.
6. Highlight Clear Track.
7. Press ENTER.
The active track is cleared, and you are returned to the
Track Log
screen.
To Next Page
Loading...
Need help?
General
