USING YOUR COOKTOP
SURFACE BURNER PILOT
if equipped for _ __"_PILOT g
Ifappliancehas notbeen operated a _ FLAM LIGHTER
longperiodof time, a longerwaitingpe- '/8; _ c_p CONE
riodfor ignition of the pilot may be nec-
essary due to air in the gas line.
To light pilot:
1. Be sure all control valves are in the
"OFF" position before turning on FLASHTUBE
maingas supply to the range. _ "_"
2. Turn on main gas supply to range. LIGHTING TOPPILOT SHUTDOWN INSTRUCTIONS
3. Lift cooktop and turn pilot shut off PILOT ADJUSTMENT When surface burner cooking is fin-
valve to "ON" position. To adjust pilot: ished,the control knobshould beturned
Lift the main top. Turn pilot adjustment to "OFF" position. The top burner pilot
Pilot adjustment screw screw with a screwdriver.The surface will remainlit.When the recreationalre-
burner pilot flame should be about 1/8 hicle is not in use or while traveling, lift
OFF. - -.,_ _ inch abovethe lighter cup as shown in the cooktop andturn pilotshut-off valve
illustration, handle to "OFF" position and turn off
main gas supply.
P/LOT SHUT OFF VALVE
4. Touch lighted matchto pilot.
-5-
To Next Page
Loading...
