Magicard Pronto - Choosing the Right Dye-Film

ID Card Printer – User Manual
- 17 -
The Table below is a guide to selecting the best Dye-Film to use for any intended application.
* Ribbon Panel Layout Key: Y=yellow, M=magenta, C=cyan, K=resin, O=overcoat (No Colour)
Note :
• 300YMCKO Dye-Film is generally the appropriate choice for colour printing with this
printer.
• 1000K & 600KO Dye-Film – where running costs are critical, monochrome printing is a
fraction of the cost of colour printing.
CHOOSING THE RIGHT DYE-FILM
Type of images you
want to print
Cards per
Ribbon
Ribbon
Panel
Layout
*
Part Number
2 digit
** = supplier
code
Colour (1 side only) 300 (printing on 1 side only) YMCKO **300YMCKO
Monochrome:
Black
Red
Blue
Green
Gold
Silver
White
Scratch
1000 (printing on 1 side only) K
**1000K-n
(n = colour)
Black + Overcoat 600 (printing on 1 side only) KO **600KO