3. There are 2 big ribs on the drive shaft, let the drive shaft ribs
completely go through 2 of the 4 crossed notches.
4. Push the chopper blade down to the end，holding the drive shaft
and turn clockwise to lock the chopper blade &
drive shaft as the LOCK direction markings
shown on the chopper blade plastic part.
When using slicing, shredding or french fry cutting blades, put the drive
shaft
④
onto the food processor bowl
③
, take out one blade then insert it into
blade holder disc
⑤
, seat the blade (
⑭⑮⑯⑰⑱
) and blade holder disc
⑤
together onto the drive shaft
④
, make sure the blade holder disc is firmly and
evenly on the top of the drive shaft
④
before further operation.
4. Put food into the food processor bowl
③
then lock bowl lid
⑥
, protective cover
⑧
and safety lock buckle
⑦
while using the chopper blade
⑫
or dough blade
⑪
. When
using slicing, shredding or French Fry blade
⑭⑮⑯⑰⑱
, lock bowl lid
⑥
, protective
cover
⑧
and safety lock buckle
⑦
first, ingredients should be filled through feed
chute once the appliance is running.
Attention:
Only one of the 7 blades can be used each time.
Always lock food processor bowl
③
, bowl lid
⑥
, protective cover
⑧
and safety
lock buckle
⑦
before turning on the appliance.
The rotary switch should in the OFF position before plugging into the socket, use
PULSE function to confirm whether the appliance is well assembled. If there is
anything abnormal, unplug the appliance and re-assemble the appliance as
above steps.
Please check how to install our appliance from Magiccos Amazon page.
To Next Page
Loading...
