How to use chopper blade
Chopper blade ⑫& drive shaft④ assembly and usage
Place the motor base evenly on your countertop, with a good power outlet, follow
above Fig and below steps to use the chopper blade assembly.
1. Place the food processor bowl handle position as the guiding symbols and
words on base, lock the bowl firmly onto the base.
2. Find the UP side of the chopper blade (The laser markings on the blade show the
upward side), find the 4 crossed notches on the chopper blade plastic part, there
are 2 ribs on the drive shaft, let the ribs go through 2 of the 4 crossed notches ,
push the chopper blade to the end, holding the plastic part of the chopper blade
and twist the drive shaft clockwise as the LOCK directional marking to lock the
chopper blade firmly.
To Next Page
Loading...
