How to Use the Appliance
Installation
Please follow below reference installation steps, below part numbers have been
listed on page 1.
1. Position the motor base② on the flat and dry place.
2. Position the food processor bowl ③onto motor base②, place the bowl handle to
the arrow marking position on the base , turn
clockwise to lock the bowl onto the base.
3. Take out the blade and follow below steps to put them into the bowl.
When using the chopper blade⑫ or dough blade⑪, just seat it onto drive
shaft④, assemble the drive shaft④ and blade⑪⑫together, then put them as
an assembly together onto the food processor bowl③.
Assemble the chopper blade⑫ to the drive shaft④ according to the
following steps (similar steps for assembling the dough blade ⑪ and
drive shaft④).
1. Find the UP side of the chopper blade
2. Find the 4 crossed notches near the 4 rivets
To Next Page
