inteleSmart2 Instruction Manual
June 2016
Page 43 of 49
8.6 2.4 GHZ: FHSS
Channel sets are designated between 1 and 32. The frequency range is between 2402-2478 MHz. The
frequency hopping protocol does not use one particular frequency to transmit a message; messages are
transmitted over multiple frequencies in a predefined sequence or channel set. In doing so, this protocol
is able to compensate for interference that may be present on a single frequency by sending the message
across multiple frequencies.
This receiver is available with optional licensed frequencies per customer request. If utilizing a licensed
frequency, please refer to the factory application documentation that was shipped with the receiver or
contact the factory for licensed frequency details.
To Next Page
Loading...
