How to fix Magnetrol Radar software error?
To resolve software errors, verify the level reading and, if incorrect, check the configuration. If issues persist, recalibration at the factory may be necessary.
What should I check for Magnetrol Radar software error?
To address software errors, confirm the proper configuration and check the measurement type. Also, saving a fresh Echo Rejection Curve might help.
What to do if Magnetrol Radar software error relates to vessel dimensions?
To address software errors, check settings related to vessel dimensions and custom table entries. If issues persist, it might be necessary to return the transmitter to the factory for recalibration.
What to do if Magnetrol Radar software error occurs because liquid reaches blocking distance?
To troubleshoot software errors, make sure liquid cannot reach the blocking distance.
What to do if Magnetrol Radar software error is related to loop resistance?
To troubleshoot software errors, verify loop resistance and replace the loop power supply if necessary. Also, perform the Adjust Analog Output maintenance procedure.
How to fix Magnetrol Radar software error by cleaning gold pin?
To fix software errors, torque the HF nut, clean the gold pin on the transmitter and the socket on the antenna, and check settings such as Fiducial Gain Window Increase Fid Gain. Contact MAGNETROL Technical Support if the problem persists.
What to do if Magnetrol Radar software error occurs in cold conditions?
To resolve software errors, insulate the transmitter or relocate it to a warmer area.
How to adjust rate of change setting on Magnetrol Radar to fix software error?
To resolve software errors related to rate of change, confirm the actual rate of change and adjust the rate of change setting if needed.
General| Accuracy | ± 1 cm |
|---|---|
| Output Signal | 4–20 mA HART |
| Power Supply | 24 VDC |
| Process Temperature | -40 to +392 °F (-40 to +200 °C) |
| Process Pressure | 0 to 4 bar |
| Enclosure Rating | Type 4X, IP66 |
| Material | 316L stainless steel |
| Application | Liquid Level Measurement |
To Next Page
