See Section 2.3. of Installation and Operating Manual
58-602 for more detailed application information and
limitations.
5.1.2 Environmental
See Section 3.6 of Installation and Operating Manual
58-602 for environmental limitations.
5.2 Skill Level of Personnel
Personnel following the procedures of this safety manual
should have technical expertise equal to or greater than that
of a qualified Instrument Technician.
5.3 Necessary Tools
Following are the necessary tools needed to carry out the
prescribed procedures:
• Open-wrenches or adjustable wrench to fit the process con-
nection size and type.
•
Antenna 2" (50 mm)
•
Transmitter 1
1
⁄2" (38 mm)
•
Torque wrench is highly desirable
• Flat-blade screwdriver
• Digital multimeter
• 24 VDC power supply, 23 mA minimum
5.4 Storage
The device should be stored in its original shipping box
and not be subjected to temperatures outside the storage
temperature (-50 °C to +80 °C) shown in the PULSAR
Model R96 Installation and Operating Manual and associ-
ated specifications.
5.5 Installation
Refer to the PULSAR Model R96 Installation and
Operating Manual Bulletin 58-602 for the proper installa-
tion instructions.
6
58-650 Pulsar
®
Model R96 SIL Functional Safety Manual
To Next Page
Loading...
Need help?
General
