MAGSTIM RAPID2 - Devices Covered; Frequently Used Functions

Magstim Rapid²
Operating Manual
© The Magstim Company Limited 2 MOP03-EN-03
research” by Rossi et al (2009) and recommends the use of a standard questionnaire to screen
candidates prior to administering TMS.
1.3 Devices Covered
This document is applicable to the following device:
 Magstim Rapid² System
This consists of:
 Magstim Standard Rapid² System (P/N: 3004-00)
 Magstim Super Rapid
2
System (P/N: 3005-00)
 Magstim Rapid
2
Plus
1
System (P/N: 4100-00)
 Rapid
2
UI Controller (P/N: 3022-00)
 MEP Pod Assembly (P/N: 3526-00)
 Footswitch (P/N: 9525-01)
and may also consist of the following optional parts:
 Rapid² Printer Package (P/N: 3804-00)
If a Magstim Rapid² UI Controller is not used, a remote control will need to be used.
Note: Please also consult any labelling and information accompanying stimulating coils and other
accessories for safety and use information regarding these devices.
1.4 Frequently Used Functions
Frequently used functions as defined during Magstim’s usability process are identified with (*).
Frequently used functions are functions of the Rapid² that frequently involve user interaction.