Need help?Do you have a question about the MAGSTIM RAPID2 and is the answer not in the manual?
Describes the intended applications and purpose of the Magstim Rapid² systems for non-invasive magnetic stimulation.
Lists medical conditions and patient types for whom the Magstim Rapid² system should not be used.
Describes the Standard and Super Rapid² systems, including their components like PSU, Stimulator, and UI.
Details the Magstim Rapid² Plus¹ system, highlighting its additional PSU module for higher frequencies.
Explains the touch screen interface used to control the Magstim Rapid² system, including its front panel elements.
Lists and describes essential accessories like Stimulating Coils and MEP Pod, emphasizing genuine Magstim parts.
Covers initial checks, system assembly, and setup procedures to ensure proper operation and compliance.
Guides the user on how to connect accessories such as stimulating coils and MEP Pod to the Magstim Rapid² unit.
Explains how to operate the system through various modes including Single Pulse, Repetitive, Session, and System Options.
Covers file maintenance, patient details entry, file creation/usage, SD card operations, and printing.
Describes the use of external triggering devices and their impact on discharge frequency and coil temperature.
Covers operator responsibilities for daily checks, accessory inspection, and battery replacement for system integrity.
Addresses checking coil/socket contacts for wear and professional repair procedures for system damage.
Details selecting correct voltage and fuse ratings for the system based on the power supply, including replacement guides.
Provides guidelines for cleaning and disinfecting the system and accessories using isopropyl alcohol, with notes on touch screen care.
Outlines servicing requirements by authorized personnel, recommends PAT testing, and defines device lifetime and disposal procedures.
Outlines general safety classifications, EMC compliance, installation advice, and operating modes of the Magstim Rapid² system.
Covers coil temperature protection, other safety measures like idle shutdown, and coil type recognition.
Lists key technical parameters including output, pulse characteristics, capacitor life, and interface specifications.
Provides contact information for general product inquiries, including address, phone, fax, and email.
Lists contact details for arranging servicing, repairs, and obtaining technical support for the Magstim Rapid² system.
Offers contact information for sales-related inquiries, including telephone, fax, and email address.
Lists error codes from the base controller and coil, with their descriptions for troubleshooting.
Encompasses error codes related to main system operations and hardware components, providing diagnostic information.
General| Model | RAPID2 |
|---|---|
| Pulse Type | Biphasic |
| Repetition Rate | Up to 100 Hz |
| User Interface | Touchscreen |
| Connectivity | USB, Ethernet |
| Type | Magnetic Stimulator |
| Coil Types | Figure-8, Circular |
| Power Supply | Mains |
| Weight | Approx. 15 kg |
| Cooling System | Air-cooled |
| Safety Features | Emergency stop, Overheat protection |
To Next Page
