Magtek eDynamo - Page 3

eDynamo| Secure Card Reader Authenticator | Programmer’s Manual (COMMANDS)
Page 3 of 245 (D998200115-17)
Table 0-1 - Revisions
Rev Number
Date
Notes
10
January 2016
Initial Release derived from master programmer’s manual
11
October 28, 2016
Miscellaneous clarifications and cleanup derived from
master programmer’s manual rev 11
15
May 30, 2018
Derived from master programmer’s manual rev 15:
Find instances of eDynamo and add mDynamo where
applicable; Add MSR Only/Keypad Entry Only to properties
and commands they pertain to; fix properties per device table
for mDynamo; fix EMV slot 2 9F06 and 9F01 default
settings; Add SL2 (not encrypting) option for DynaPro
format EMV data; Promote former Appendix D to section 5;
Add detail from D99875433-41 about Command 0x14 -
Get Device State (MSR Only); Add section 6.1 per request
from sales/support; Add fixed key features; Improve clarity
of encryption-related features; Add command security
information for mDynamo; Replace cross-references to
unpublished Audio Reader Communication Protocol_v1
with in-place content; Change "manual entry" to "keypad
entry" for clarity; Add missing example tables for extended
commands in section 8.4 8.5; Add detail to Extended
Command 0x0300 - Initiate EMV Transaction (EMV
Only); Fix section 5 to accommodate EMV-only devices;
Expose Property 0x67 - EMV Data Encryption Variant
(EMV Only), Property 0x54 - Card Data Encryption
Variant (MSR Only, Configurable MSR Variants Only),
Property 0x56 - MagnePrint Data Encryption Variant
(MSR Only, Configurable MagnePrint Variants Only);
Move KSN interpretation info to Command 0x09 - Get
Current TDES DUKPT KSN to provide details for devices
that do not have EMV; Clarity rewrites of Command 0x1C -
Get Remaining MSR Transactions Counter (MSR Only),
Remaining MSR Transactions; Add Dynasty, kDynamo,
mDynamo Contactless Module, pDynamo, tDynamo;
Remove vestigial Properties Per Device table from section 9
(now covered by section heading tags); Add Property 0x52 -
Host Poll Timeout (HID Only | KB Only); Add contactless
default settings to Appendix E EMV Factory Defaults
(EMV Only); Add cDynamo, Dynamag Duo; Add Property
0x6D - EMV Contact Notification Configuration
(Contact Only); Modify Property 0x33 - Card Inserted
(MSR Insert Only | Contact Only); Multiple clarifications
to Masked Track Data and Identifying ISO/ABA and
AAMVA Cards For Masking (MSR Only), including
Service Code unmasked on eDynamo and mDynamo;
Change “insert a card” “swipe a card” and “tap a card” to
“present payment” (reviewed by EL and HM); Tag relevant
features and values as Only Contact / Online; Retrofit