Magtek eDynamo - Track 3 Absolute Data Length (HID | GATT | SLIP, 3-Track Only); Track 1 Encrypted Data; Track 2 Encrypted Data; Track 3 Encrypted Data

6 - Magnetic Stripe Card Data Sent from Device to Host (MSR Only | Keypad Entry Only)
eDynamo| Secure Card Reader Authenticator | Programmer’s Manual (COMMANDS)
Page 46 of 245 (D998200115-17)
6.7.6 Track 3 Absolute Data Length (HID | GATT | SLIP, 3-Track Only)
This one-byte value indicates the number of usable bytes in the Track 3 Encrypted Data value after
decryption. If the value is 0, the device found no data on the track or encountered an error decoding the
track.
Format
Where to Find Value
HID
Usage 0x53
Streaming
N/A
TLV
N/A
GATT/SLIP
Offset 854
6.7.7 Track 1 Encrypted Data
For information about the contents of track data, see section 6.1 About Track Data. For information
about decryption, see section 5 Encryption, Decryption, and Key Management.
Format
Where to Find Value
HID
Usage 0x30
TLV
Data Object 8215
GATT/SLIP
Offset 7..118
6.7.8 Track 2 Encrypted Data
For information about the contents of track data, see section 6.1 About Track Data. For information
about decryption, see section 5 Encryption, Decryption, and Key Management.
Format
Where to Find Value
HID
Usage 0x31
TLV
Data Object 8216
GATT/SLIP
Offset 119..230
6.7.9 Track 3 Encrypted Data
On 2-track devices (see Table 1-2 - Device Features), this value is included in incoming data as a null
value.
For information about the contents of track data, see section 6.1 About Track Data. For information
about decryption, see section 5 Encryption, Decryption, and Key Management.
Format
Where to Find Value
HID
Usage 0x32
TLV
Data Object 8217
GATT/SLIP
Offset 231...342