MID PTO
The speed of mid PTO is 2,000rpm. Use the PTO lever to engage.
The PTO switch must be OFF before PTO is engaged.
1. Decrease engine speed to near idle.
2. Make sure that PTO switch is OFF.
3. Engage mid PTO using the PTO lever.
4. If rear PTO is needed to engage, shift the PTO lever to correct position.
5. Turn on the PTO switch.
6. Increase engine speed to desired speed.
Mid
Mid + Rear
Rear
EG RPM MID PTO Speed
2875 2000 RPM
3000 2087 RPM
Important
If operator turns off PTO switch, rear PTO and mid PTO are off at once.
Caution
Do not operate any implement at a high speed than is specified for it.
When making adjustments to the implement stop the engine to avoid serious
injury.
When leaving the tractor stop the engine, and remove the key. Set the parking
brake.
38
To Next Page
Loading...
Need help?
General