7 Important On-Product Labels
7 IMPORTANT ON-PRODUCT LABELS
Replacement labels are free of charge and can be requested from a
ROXOR authorized dealer with a registered Product Identification
Number (PIN).
Removal of, or tampering with any of these important
on-product labels is highly discouraged by Mahindra. Removal of
these labels may result in operators missing critical safety instruc-
tions which may result in severe injury or death.
A person who knowingly removes, obliterates, tampers
with, or alters the Product Identification Number (PIN) on the ROXOR,
with intent to further the theft of it pursuant to the Motor Vehicle
Theft Prevention Act, shall be fined under this title, imprisoned not
more than 5 years, or both.
7.1 ANSI/ROHVA Labels
The labels in this section are to comply with the requirements set
forth by the American National Standards Institute (ANSI), spe-
cifically standard ANSI Z535.4-2007.
The ROXOR is delivered with several labels containing important
safety information. Some of these labels are affixed to the ROXOR
for the safety of the operator, passenger and bystanders. They need
to be clean and visible at all times. If missing or damaged, they need
to be replaced. Replacement labels are free of charge and can be
requested from a ROXOR authorized dealer with a registered Product
Identification Number (PIN).
Any hang tags shown in this section should only be
removed by the ultimate consumer after purchase. Any person who
operates, or is a passenger in the ROXOR should be provided with
and read and understand the information contained in the on-product
labels before riding.
Label Number – 0003AUA00090N
Name – Roll Over Protection Structure (ROPS)
Location – Left upper ROPS
© 2018 Mahindra Vehicle Sales and Service, Inc. All Rights Reserved. 11
To Next Page
Loading...
Need help?
General
