Mahr Millimar C 1202 - Operating Elements and Interfaces

14
Mahr GmbH • Millimar C1202
0
0
0
Mains connection
1.5.4 Ports
Data output
Foot switch port
1.5.3 Mode display for master measurement
Manual mode
=> Master measurement is performed
for the feature at which the hand is
pointing
Sequential mode
=> Master measurement is performed
for the feature at which the hand is
pointing. Hand switches automat-
ically to next feature. The master
measurement can now be performed
for this feature.
Parallel mode
=> Master measurement is performed
for all active features at the same
time.
Slot for Micro SD
memory card
Measuring probe input C1 and C2