12
www.major-equipment.com
Blade Rotations
Maintenance
The Rollermower must always be disconnected form the tractor before any cleaning, lubricating and servicing opera-
tions can be carried out.
If emergency operations are required whilst the machine is connected to the tractor, switch off the engine, engage the
parking brake and disengage the PTO.
Good, regular maintenance and correct use are if the Rollermower is to remain safe and long lasting.
PTO Shaft Maintenance
Guard Removal and Yoke End Greasing
1. Prise back locking tabs
2. Pull back PTO Guard
3. Grease points as shown
4. Push Guard into position
5. Click into place
6. Tie check chain
PTO Guard Greasing Intervals
Maintenance Schedule
INITIALLY 8 HOURS 16 HOURS
PTO Shafts
●●
Axle Bushings
●●
Wing Hinge Plate
●●
Roller Height Adjusters
●●
To Next Page
Loading...