Major 4200 - Introduction; Product Identifi Cation; Machine Serial Numbers; Product Specifi Cations

1
www.major-equipment.com
Introduction
Thank you
We appreciate having you as a customer and wish you many years of safe and satisfi ed use of your machine.
Using Your Operator’s Manual
This manual is an important part of your machine and should remain with the machine when you buy it.
Reading your operator’s manual will help you and others avoid personal injury or damage to the machine. Information
given in this manual will provide the operator with the safest and most effective use of the machine.
Sections in your operator’s manual are placed in a specifi c order to help you understand all the safety messages so
you can operate this machine safely. You can also use this manual to answer any specifi c operating or servicing ques-
tions.
Safety Issues
Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as
helpful operating and servicing information. Please read all the information carefully to avoid injury and machine dam-
age.
Product Identifi cation
Machine Serial Numbers
If you need to contact MAJOR or your MAJOR dealer for information on servicing or spare parts, always provide the
product model and serial numbers.
We suggest that you record your machine details below:
Model No: ____________________________________
Serial No: ____________________________________
Date of Purchase: ____________________________________
Dealer Name: ____________________________________
Dealer Telephone: ____________________________________
Product Specifi cations
Model
Working
Width
Power (HP) PTO rpm Cutting Height Rotors Blades Weight Tyre Pressure Gearbox oil
4200 1.35m 25-35 540 12 - 150mm 2 8 360kg
n/a EP 90
6300 1.86m 25-50 540 12 - 150mm 3 3 450kg
2 bar EP 90
8000 2.4m 30-60 540 12 - 100mm 2 8 650kg
n/a EP 90
8400 2.3m 30-60 540 12 - 150mm 4 4 510kg
2 bar EP 90
8400FL 2.3m 60-110 1000 12 - 150mm 4 8 550kg
n/a EP 90
120003PTL 3.56m 45-130 540 12 - 150mm 4 16 1280kg
n/a EP 90
12000 3.56m 50-130 540 12 - 150mm 4 16 1500kg
2 bar EP 90
18000 5.4m 60-180 540 12 - 150mm 6 24 1890kg
2 bar EP 90
Model
Working
Width
Transport
Width
Power
(HP)
PTO rpm
Cutting
Height
Rotors Blades
Weight (Rear
Mounted)
Weight
(c.w frame)
Tyre
Pressure
Gearbox
oil
11000 3.2m 2375mm 35-80 540/1000 12 - 150mm 5 10 1030kg 1140kg 2 bar EP 90
15000 4.6m 2375mm 40-80 540/1000 12 - 150mm 7 14 1280kg 1390kg 2 bar EP 90