Major 601SL - Safety; Machine Safety Labels; Product Specifications

www.major-equipment.com
2
Product Specications
Model PTO input Cutting width Cutting Range No. of blades Power requirements
601SL 540 RPM 1700mm / 5’ 7” 10 - 250mm /1/2” - 10” 2 30 - 60 HP
605SL 540 RPM 1830mm/ 6’ 10 - 250mm /1/2” - 10” 2 30 - 60 HP
Jungle Buster 1000 RPM 1680mm/ 5’ 6” 50 - 250mm/ 2” - 10” 3 50 - 150 HP
609SL 540 RPM 1955mm/6’ 4” 100 - 187mm/4” - 7.5” 2 30 - 60 HP
To avoid injury, read the manual Check the tightness of the transmission
Rotating blade hazard
PTO entanglement
hazard - keep clear
of PTO drives.
Safety
Machine Safety Labels
The machine safety labels shown in this section are placed in important areas on your machine to draw attention to
potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this safety alert symbol.
DANGER identies the most serious hazards.
The operator’s manual also explains any potential safety hazards whenever necessary in special safety messages that
are identied with the word, CAUTION, and the safety-alert symbol .
Grease points
Shaft alignment
High oil pressure
hazard
Moving parts
Maximum speed