8
Instrucons Guide
DAB/DAB+ Radio
Press the Mode button (Ref.) to switch to DAB/DAB+ radio
mode. The radio should already have scanned for available
stations during set up.
Ensure that the radio handle (Ref.) is extended above the radio
for the best signal to be received.
If the radio has not automatically scanned for available stations
or you would like to rescan for available stations, press the Menu
button (Ref.) to open DAB settings and select the option for
“Full Scan” with the Scroll/Select dial (Ref.). This would be
advisable if you are having trouble listening to particular stations
or functionality issues.
Once you have chosen to scan, the radio will display “Scanning...”
as it starts scanning for available stations with good signal. Once
the scan is complete, the rst radio station with good signal will
begin to play.
To browse through all of the stations that have been stored in
DAB/DAB+ mode, scroll through the station list by twisting the
Scroll/Select dial (Ref.). Once you have found your desired
station, press down the Scroll/Select dial to conrm your choice.
Your chosen station should then begin to play.
To Next Page
Loading...
Need help?
General