12
Instrucons Guide
FM Radio
Press the Mode button (Ref.) to switch to FM radio mode. The
rst time that FM mode is selected, the FM frequency “87.50MHz”
will be displayed on the screen.
Ensure that the radio handle (Ref.) is extended above the radio
for the best signal to be received.
To begin searching for available FM stations, an auto scan will
need to be initiated. To begin scanning for available stations,
press down the Scroll/Select/Scan dial (Ref.) and the radio will
display “Scanning....” as it scans quickly up the bandwidth for
available stations.
To scan quickly down the bandwidth, twist the Scroll/Select/
Scan dial anti-clockwise and press down the dial. To scan quickly
up the bandwidth, twist the Scroll/Select/Scan dial clockwise
and press down the dial. Once a station with good signal has
been found, the scanning will stop automatically.
How to tune a specic frequency manually
To tune the radio to a specic frequency slowly, scroll up
the frequency bandwidth by turning the Scroll/Select/Scan
dial clockwise. To tune the radio slowly down the frequency
bandwidth, turn the Scroll/Select/Scan dial anti-clockwise.
To Next Page
Loading...
Need help?
General